| Recent Comments |
| Categories |
| Archives |
| Tags |
19-inch (11)
audio (18)
audio technology (25)
ballad (7)
bands (17)
bas van kampen (11)
Behringer (8)
book (27)
composition (7)
compositions (13)
computer (8)
Configuration (9)
cubase (25)
daw (27)
daw controller (8)
decibels (9)
diary (56)
education (21)
guitar (10)
hammond (9)
hardware (42)
headphone (11)
keyboards (13)
kontakt (8)
mastering (30)
microphone (7)
mix (18)
mixing (40)
monitoring (15)
orchestral (14)
outboard (13)
plugin (20)
pop (22)
recording (11)
recover (7)
skippy studio (8)
software (15)
soul (10)
sound (9)
sound education nederland (25)
sound pressure (8)
steinberg (19)
studio (68)
synthesizer (15)
video (31)
Radial ProRMP passive reamper
The Radial ProRMP is a 100% passive Reamper. This means it does not require any external powering. The magic behind the ProRMP’s great tone is a custom wound transformer that at once converts the balanced line level source to a hi-z output for your amp while also acting as an electrical isolator to eliminate troublesome ground loops that can often cause buzz and hum in the sound. The ProRMP connects from my DAW (Cubase) to my guitar amp (Laney IRT60H) and effects units and does all the impedance matching for you. This re-amping is an alternative for Amplitube 5 that can be used as a plugin in Cubase.
Applications
Specifcations
| Audio circuit type: | Passive, transformer isolated |
| Frequency response: | 20Hz ~ 20KHz (+0/-1dB) |
| Dynamic range: | >137dB |
| Gain: | >-10dB |
| Total harmonic distortion: | 0.003% |
| Phase Deviation: | 0.3° @ 100Hz; 5° @ 20Hz |
| Input Impedance: | 1600 Ohms |
| Output Impedance: | 1850 Ohms |
| Common Mode Rejection Ratio: | 100dB @ 60Hz (unbalanced source) |
| Equivalent Input Noise: | >-98dBu Noise plus gain |
| Noise: | -111dBu |
| Maximum Input: | >+26dBu |
Video
References
Dcouments
Last updated on February 17th, 2025 at 07:13 am
